Sanyo PLC-XU4000 Owner's Manual page 50

Setting
Enter a Logo PIN code
Use the Point
Point button to fix the number and move the red frame
►
pointer to the next box. The number changes to "
you fixed an incorrect number, use the Point
move the pointer to the number you want to correct, and
then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
Set. Press the SELECT button so that you can start to
operate the projector.
If you entered an incorrect Logo PIN code, Logo PIN
code and the number (
moment. Enter the correct Logo PIN code all over again.
Change the Logo PIN code lock setting
Use the Point
press the SELECT button to make a choice.
Logo PIN code change
Logo PIN code can be changed to your desired four-
digit number. Press the SELECT button to select Logo
PIN code change. Current logo PIN code dialog box
appears, use the Point
code. The New Logo PIN code input dialog box appears.
Set a new Logo PIN code, confirmation box appears,
choose yes to set the new Logo PIN code.
Be sure to note the new Logo PIN code and keep it on
hand. If you lost the number, you could no longer change
the Logo PIN code setting.
CAUTION:
wHEN yOU HAVE CHANGED THE LOGO PIN CODE,
wRITE DOwN THE NEw PIN CODE IN COLUMN OF
THE LOGO PIN CODE NO . MEMO ON PAGE 76, AND
KEEP IT SECURELy . SHOULD THE LOGO PIN CODE
BE LOST OR FORGOTTEN, THE LOGO PIN CODE
SETTING CAN NO LONGER BE CHANGED .
50
Downloaded From projector-manual.com Sanyo Manuals
buttons to enter a number. Press the
▲▼
) will turn red for a
   
buttons to switch On or Off, and then
▲▼
buttons to enter the current
▲▼
Enter a Logo PIN code
". If

button to
◄
Logo PIN code change
Logo PIN code