Sanyo PLC-XU4000 Owner's Manual page 45

Keystone
This function is used to adjust keystone distortion of the
projected image. Use the Point ▲▼ buttons to choose the
item you want to adjust.
Keystone
To correct keystone distortion, press the SELECT button.
Keystone appears on the screen. Use the Point ▲▼
buttons to correct keystone distortion (p.23).
Store
To store or reset the keystone correction, press the
SELECT button.
Store ............Keep the keystone correction even when
Reset............ Release the keystone correction when the
Ceiling
When this function is set to On, the picture will be top/bottom
and left/right reversed. This function is used to project the
image from a ceiling-mounted projector.
Rear
When this function is set to On, the picture will be left/right
reversed. This function is used to project the image from
rear of the screen.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
Downloaded From projector-manual.com Sanyo Manuals
the AC power cord is unplugged.
AC power cord is unplugged.
Keystone
Ceiling
Rear
Video Input
45