EverFocus PARAGON 264x4-16 Instruction Manual page 54

Grid setting by mouse:
4. Click the lower right grid cell.
5. Click the upper left grid cell.
6. The area between the upper left and the lower right grid cells is selected.
Grid setting by front panel:
6. Press Enter key to edit the grid.
7. Use Jog/Shuttle to move to a corner cell of the requested area.
8. Press Enter key.
9. Use Jog/Shuttle to select an area from this starting point.
10. Press Enter key 2x on the last cell of the requested area to select the zone.
Apply To: Select this button to copy the recording settings to other cameras. In the following dialogue,
activate the checkboxes for all cameras you wish to copy the settings to and click "OK" to copy the settings.
"Select All" selects all cameras, "Unselect All" deselects all cameras. Click "Cancel" to exit without copying.
Figure 5-6 Camera Menu – Motion Grid Setting
48