EverFocus PARAGON 264x4-16 Instruction Manual page 74

4. Enter time bar editing mode: turn Jog knob to switch to time bar editing mode. When this mode is
selected, all 9 time bars will be highlighted within a blue frame.
5. Select desired time bar for setting: press Enter button, the first time bar will be selected for setting
and highlighted in a red frame. See above image. Press Jog to switch to desired time bar for setting.
6. Editing blocks in a time bar: when a time bar is selected (highlighted in red frame), press Enter
button, then the first block of this bar will be selected (highlighted in blue frame). Turning Jog knob to
switch to desired block as starting time, and press Enter button again to confirm. At this time, the
current and all following blocks will turn into gray, which means this gray timezone has been set to the
recording mode of gray(No Rec). User can also change the timezone to a different record mode (with
different color) by following instruction in next step.
7. Changing recording mode (color) of a timezone: Turn Jog knob to switch to the first block (with
number on it) of a timezone. Clicking Enter button and this timezone will switch to another color, which
means switching to another record mode. The color switch sequence is gray->orange->blue.
68