EverFocus PARAGON 264x4-16 Instruction Manual page 12

NOTE: The Zoom key is only active in Full screen at Main monitor.
8) MONITOR: The MONITOR key switches operation between MAIN and CALL. The active screen
will be Main monitor when LED is in "M"; Call monitor when LED is in "1" and HDMI call monitor
when LED is in "2". For more details, please refer to Chapter 4.11 MONITOR .
9) HDD: Removable SATA HDD (only for HD removable model)
NOTE: To open the HDD cover at front panel, please slightly push the cover, and it will open
automatically.
10) Record: RECORD key for manual start of recording / recording standby (event recording).
LED will be ON if DVR is recording or in record standby.
11) STOP: STOP key for Playback and Record
12) BACK: Reverse Playback key
13) PAUSE: Image freeze in playback mode
14) PLAY: Playback key
15) SEARCH: The SEARCH key opens the SEARCH menu, details in chapter 4.13 SEARCH.
16) ENTER: Enter Key for menu operation and alarm acknowledge Turn camera audio ON/OFF when
viewing full screen camera. For more details, please refer to Chapter 3.2.1.
17) COPY: The COPY key opens the menu for video data export, details in chapter 4.14 COPY.
18) JOG/SHUTTLE: Shuttle (outer wheel): In playback mode, use the SHUTTLE for fast forward / fast
Jog
Shuttle
19) MENU/ESC: Used to bring up Main Menu or exit from sub-Menus.
20) IR Receiver: Receiver for IR remote control
21) System LED
POWER: LED indicating power on.
HDD1/2: LED indicating HDD1 / HDD2 active
HDD1: Internal/Removable HDDs in DVR
HDD2: External HDDs connected by eSATA port
LAN: LED for network traffic
22) ALARM: LED for alarm status
reverse playback.
JOG (inner wheel): In PAUSE mode, use the jog to move frame by frame. Within
menu functions, use the jog to adjust the values / parameters. Use Jog to highlight
individual cameras.
Use either Shuttle or Jog to switch between MENU parameters.
6