EverFocus PARAGON 264x4-16 Instruction Manual page 43

Grid Setting:
Choose which areas of the motion grid will be included in the search. The areas you set in motion search
must also be active in the motion settings of the Camera Setting Menu. Use the mouse to drag your desired
area. Press "Set All" button to select the entire area. Press "Clear All" to deselect the entire area. Press
"Save & Back" to save the motion grid setting and go back to Motion Search menu. Press "Cancel" to skip
grid setting.
Grid setting by mouse:
1. Click the lower right grid cell.
2. Click the upper left grid cell.
3. The area between the upper left and the lower right grid cells is selected.
Grid setting by front panel:
1. Press Enter key to edit the grid.
2. Use Jog/Shuttle to move to a corner cell of the requested area.
3. Press Enter key.
4. Use Jog/Shuttle to select an area from this starting point.
5. Press Enter key 2x on the last cell of the requested area to select the zone.
Press "Search" button to start searching.
Figure 4-8 Search Menu – Set Grid
37