Remote Ptz Control - EverFocus PARAGON 264x4-16 Instruction Manual

7.4 REMOTE PTZ CONTROL

1. Use Direction Arrows (up, down, left, right) to move the camera to the desired direction and angle.
2. In Zoom option, Click "Z+" to zoom closer or "Z-" to zoom farther away.
3. In Focus option, click "F+" to increase the focus or click "F-" to decrease the focus.
4. In Iris option, you can increase the amount of light by clicking "I+" or decrease it by clicking "I-".
5. To program a preset position
a. Move PTZ camera to the specified position
b. Click "Preset" button
c. Click the number of the desired position (This will be displayed in the box)
d. Click "Set" button
6. Steps to jump to a preset position
a. Click "Preset" button
b. Click the number of the desired position
c. Click "Go" button
7. Shortcut steps for presets #1-9
a. Click digit 1-9 button without clicking any other buttons
8. Steps to delete a preset position
a. Click "Preset" button
b. Click the number of the desired position
c. Click "Delete" button
9. Steps to run Auto Pan
a. Click "Auto Pan" button
10. Pattern Operation (Pattern is the "0" Tour in Everfocus and Pelco PTZ cameras)
a. Click "Pattern" button
11. Steps to run a tour
a. Click "Tour" button
b. Click the number of the desired tour
c. Click "Go" button
12. Steps to remove a tour
a. Click "Tour" button
b. Click the number of the desired tour
116