Ip Filtering; Event Notification - Korenix 5804 User Manual

IP Filtering

The IP Filtering is also known as Access IP Table (JetPort Commander). Access IP table
specifies the IP address and subnet that can access to the device. The access is based on IP
and Netmask combination.
Note: Type the IP address and the Netmask before you click Submit. Otherwise, no user
can access the device. If the access is open to all hosts, do NOT enable this function.
Netmask: The Netmask of the host is 255.255.255.255.

Event Notification

Specify the events that should be notified to the administrator. The events can be alarmed by
means of email, SNMP trap, or system log.
Device Notification:

Hardware Reset (Cold Start): Rebooting the JetPort will trigger the event

Software Reset (Warm Start): Restarting the computer will trigger the event

Login Failed: Using wrong password in console will trigger the event

IP Address Changed: Changing network setting will trigger the event

Password Changed: Changing the password will trigger the event

Access IP Blocked: Report blocked IP addresses

Redundant Power Change: Power change will trigger the event

Redundant Ethernet Change: Ethernet master port change will trigger the event
JetPort 5804 Wireless Serial Device Server User's Manual 35