enable Alive Check. The Alive Check will re-connect virtual COM after booted up.
Service Mode- TCP Server
In TCP Server mode, you need to select the Serial Port, define the available TCP port number,
Idle timeout, Alive check, and Max. connections allowed from 1 to 5.
TCP Server Port: This is to assign the available TCP port number. The port number of TCP
Server and TCP Client should be the same.
Idle Timeout: When serial port stops data transmission for a defined period of time (Idle
Timeout), the connection will be closed and the port will be freed and re-try for connection with
other hosts. Zero is disable this setting (default). If Multilink is configured, only the first host
connection is effective for this setting.
Alive Check: The JetPort device will send TCP alive check package in each defined time
interval (Alive Check) to remote host to test the TCP connection. If the TCP connection is not
alive, the connection will be closed and the port will be freed for other hosts. Zero is disable this
setting. Default time is 420.
Service Mode- TCP Client
In TCP Client mode, you need select the Serial Port, define the destination host IP and port
number, Idle timeout, Alive check. To deploy multilink, specify up to 4 more hosts IP and Port
number.
JetPort 5804 Wireless Serial Device Server User's Manual
32