Table of Contents
Advertisement
Flush Data Buffer After is to specify the timeout time if the device doesn't receive the Delimiters
user setup.
Service Mode- Real/Virtual COM
Select the Serial Port you want to configure first. In Real/Virtual COM mode, you can define the
Idle Timeout, Alive Check, and Max. Connections allowed from 1 to 5.
Note: Since JetPort's Real/Virtual COM driver is implemented in JetPort Commander. You
should run the JetPort Commander to assign the RCOM/VCOM number. You can only change
the related parameters in web UI.
Idle Timeout: When serial port stops data transmission for a defined period of time (Idle
Timeout), the connection will be closed and the port will be freed and re-try for connection with
other hosts. Zero is disable this setting (default). If Multilink is configured, only the first host
connection is effective for this setting.
Alive Check: The JetPort device will send TCP Alive Check packet in each defined time interval
(Alive Check) to remote host to test the TCP connection. If the TCP connection is not alive, the
connection will be closed and the port will be freed for other hosts. Zero is to disable this setting
Default time is 420.
Note: If you want to auto-connect your Real/Virtual COM when power on the device, you should
JetPort 5804 Wireless Serial Device Server User's Manual
31
Advertisement
Table of Contents
