Table of Contents
Advertisement
TCP Server Port: This is to assign the available TCP port number. The port number of TCP
Server and TCP Client should be the same.
Idle Timeout: When serial port stops data transmission for a defined period of time (Idle
Timeout), the connection will be closed and the port will be freed and re-try for connection with
other hosts. Zero is disable this setting (default). If Multilink is configured, only the first host
connection is effective for this setting.
Alive Check: The JetPort device will send TCP alive check package in each defined time
interval (Alive Check) to remote host to test the TCP connection. If the TCP connection is not
alive, the connection will be closed and the port will be freed for other hosts. Zero is disable this
setting (default).
Connect on Startup: The TCP Client will build TCP connection once the connected serial
device is startup.
Connect on Any Character: The TCP Client will build TCP connection once the connected
serial device starts to send data.
Service Mode- UDP
In UDP mode, you need to select the Serial Port, define the destination host IP and Local listen
port number.
To create more destination hosts, specify the IP range of destination IP and send port number.
JetPort 5804 Wireless Serial Device Server User's Manual
33
Advertisement
Table of Contents
