York Fitness t501 Owner's Manual page 10

Final Checks
Your treadmill is now assembled. Please make the following final checks before you power up for the first time.
•
Make sure all screws / bolts are tightened
•
Make sure the treadmill is on a flat, level surface.
Power up
1. Plug one end of power cable into the treadmill as shown
2. Plug the other end into a suitable AC outlet (220-240 volt, 50Hz)
3. Switch the treadmill on using the on / off switch
4. Attach the safety key to the console
power cord
safety switch
!
NOTE: Before you run on the treadmill for the first time, use the Quick Start instructions on page 11 and allow the treadmill to
run independently for 10 minutes. Check the running mat is tightened correctly and runs smoothly. If you think the mat needs
10
ON/OFF
adjusting please see page 15 for more details.