Connecting The Supplied Power Cord - Canon LV-7285 User Manual

Connecting the Supplied Power Cord

Connect the supplied power cord to the projector.
First connect the supplied power cord's two-pin plug to the AC IN of the projector, and then connect the other plug
of the supplied power cord in the wall outlet.
When you press the Main Power switch to the On position (I), the projector will go into standby mode. When in
standby mode, the POWER indicator will light orange and the STATUS indicator will light green to show that [Normal]
mode is selected for [Standby mode].
to wall outlet ←
Make sure that the prongs are fully inserted into
both the aC in and the wall outlet.
CAUTION:
Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated
while the projector is turned on and immediately after the projector is turned off.
2. Installation and Connections
23