Skip The Power Button Operation; Enabling/Disabling The Beep - Canon SX7 MARKII User Manual

Skip the POWER Button Operation

[Direct power on]
DIGITAL PC
DIGITAL VIDEO
You can set the projector to be turned on when
you connect the power cord.
System settings
Direct power on
Disables the direct power on func-
Off
tion.
Enables the direct power on func-
On
tion.
Press the [OK] button to confirm, and then press
the [MENU] button.
Wait at least 5 minutes before turning
on the projector when you turn off the
projector with the direct power on
function. It may shorten the lamp life if
you turn on the projector immediately
after turning it off.
Set the previous [Power management
mode] to [Standby] or [Exit] in addi-
tion to this setting if you want to
enable the direct power on function.
112
ANALOG PC
COMP./SCART VIDEO/S-VIDEO

Enabling/Disabling the Beep

[Beep]
DIGITAL PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
You can enable/disable the beep when you
press a button on the top control or remote con-
trol.
System settings
Beep
Disables the beep.
Off
Enables the beep.
On
Press the [OK] button to confirm, and then press
the [MENU] button.
It does not beep if you mute the pro-
jector sound temporarily with the
[MUTE] button.
ANALOG PC