Removing The Wireless Lan Module - Clevo W170HN Service Manual

Disassembly

Removing the Wireless LAN Module

Figure 10
Wireless LAN
1. Turn off the computer, turn it over, and remove the battery
Module Removal
2. The Wireless LAN module will be visible at point
3. Carefully disconnect the cables
a. Locate the WLAN.
4. The Wireless LAN module
b. Disconnect the cables
and remove the screw.
c. The WLAN module will
a.
pop up.
d. Remove the Wireless
LAN module.
Note: Make sure you
reconnect the antenna
cable to the "1 + 2"
socket (Figure 10b).
b.

5.Wireless LAN Module
• 1 Screw
2 - 14 Removing the Wireless LAN Module
& , and then remove the screw
2 3
(Figure 10c) will pop-up, and you can remove it from the computer
5
c.
1
2 3
4
(page 2 - 5) and the component bay cover
on the mainboard (Figure 10a).
1
(Figure 10b)
4
5
(page 2 - 9).
.
(Figure 10d).
d.
5