Removing The Keyboard - Clevo W170HN Service Manual

Removing the Keyboard

1. Turn off the computer and remove the battery
-
2. Remove the screws and use a screwdriver to carefully push out the top cover module at point
1 2
11a).
3. Remove the top cover module
4. Carefully lift the keyboard
10
5. Disconnect the keyboard ribbon cable
6. Carefully lift up the keyboard
a.
1
b.
4
4
c.
5 6 7 8
(page 2 - 5).
(Figure 11b) and the screws
4
up, being careful not to bend the keyboard ribbon cable
from the locking collar socket
11
(Figure 11e) off the computer.
10
d.
2
3
e.
9
- (Figure 11c).
5 9
(Figure 11d).
(Figure 11d).
12
11
10
12
10
Disassembly
Figure 11
Keyboard Removal
(Figure
3
a. Remove the screws and
use a screwdriver to care-
fully push out the top cover
module at point 3 .
b. Remove the top cover
module.
c. Remove the screws.
d. Lift the keyboard up and
disconnect the cable from
the locking collar.
e. Remove the keyboard.

4. Top cover module
10. Keyboard
• 7 Screws
Removing the Keyboard 2 - 15