Removing And Installing A Processor - Clevo W170HN Service Manual

Removing and Installing a Processor

Processor Removal Procedure
1. Turn off the computer, remove the battery
2. The CPU heat sink will be visible at point
, ,
3. Remove screws , the reverse order indicated on the label
3 2 1
a.
A
(page 2 - 5) and the component bay cover
(Figure 7a) on the mainboard.
A
(Figure
b.
1
3
(page 2 - 9).
7b).
2
Removing and Installing a Processor 2 - 11
Disassembly
Figure 7
Processor Removal
a. Remove the cover and
Iocate the heat sink.
b. Remove the screws in
the order indicated.

• 3 Screws