Chapter 2
Installation
This Chapter covers the physical installation of the LevelOne 54Mbps Wire-
less AP Router.
Requirements
•
Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
•
TCP/IP protocol must be installed on all PCs.
•
For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable
modem (for WAN port usage)
•
To use the Wireless Access Point, all Wireless devices must be compliant with the
IEEE802.11b or IEEE802.11g specifications.
Procedure
1. Choose an Installation Site
Select a suitable place on the network to install the LevelOne 54Mbps Wireless AP Router.
Ensure the LevelOne 54Mbps Wireless AP Router and the DSL/Cable modem are pow-
ered OFF.
Figure 4: Installation Diagram
2
6