Table of Contents
Advertisement
Wireless Router User Guide
Wireless Screen
The LevelOne 54Mbps Wireless AP Router's settings must match the other Wireless stations.
Note that the LevelOne 54Mbps Wireless AP Router will automatically accept both 802.11b
and 802.11g connections, and no configuration is required for this feature.
To change the LevelOne 54Mbps Wireless AP Router's default settings for the Wireless
Access Point feature, use the Wireless link on the main menu to reach the Wireless screen. An
example screen is shown below.
Data - Wireless Screen
Identification
Station name
Region
SSID
Figure 7: Wireless Screen
On your PC, some Wireless status screens may display this name as the
Access Point in use.
Select your region from the drop-down list. This field displays the
region of operation for which the wireless interface is intended. It may
not be legal to operate the router in a region other than the region
shown here. If your country or region is not listed, please check with
your local government agency for more information on which channels
you are allowed to use, and select a region which allows those chan-
nels. (The channel list changes according to the selected region.)
•
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set Identi-
fier).
•
To communicate, all Wireless stations should use the same
SSID/ESSID.
16
Advertisement
Table of Contents
