Table of Contents
Advertisement
Wireless Router User Guide
"Release"
OR
"Renew"
Refresh
Connection Details - Fixed/Dynamic IP Address
If your access method is "Direct" (no login), a screen like the following example will be
displayed when the "Connection Details" button is clicked.
Figure 29: Connection Details - Fixed/Dynamic IP Address
Data - Fixed/Dynamic IP address Screen
Internet
Physical Address
IP Address
Network Mask
Default Gateway
DNS IP Address
DHCP Client
•
If the ISP's DHCP Server has NOT allocated an IP Address for
the LevelOne 54Mbps Wireless AP Router, this button will say
"Renew". Clicking the "Renew" button will attempt to re-
establish the connection and obtain an IP Address from the ISP's
DHCP Server.
•
If an IP Address has been allocated to the LevelOne 54Mbps
Wireless AP Router (by the ISP's DHCP Server), this button will
say "Release". Clicking the "Release" button will break the con-
nection and release the IP Address.
Update the data shown on screen.
The hardware address of this device, as seen by remote devices on
the Internet. (This is different to the hardware address seen by
devices on the local LAN.)
The IP Address of this device, as seen by Internet users. This address
is allocated by your ISP (Internet Service Provider).
The Network Mask associated with the IP Address above.
The IP Address of the remote Gateway or Router associated with the
IP Address above.
The IP Address of the Domain Name Server which is currently used.
This will show "Enabled" or "Disabled", depending on whether or
not this device is functioning as a DHCP client.
If "Enabled" the "Remaining lease time" field indicates when the IP
Address allocated by the DHCP Server will expire. The lease is
automatically renewed on expiry; use the "Renew" button if you wish
to manually renew the lease immediately.
42
Advertisement
Table of Contents
