Operation; Remove/Replace The Stand - Honeywell C1 Quick Installation Manual

Wi-fi security camera

Hide thumbs Also See for C1:

Table of Contents

Operation

The stand is connected to the camera by a magnet.

If you want to remove the stand to hang the camera on

the wall or replace the SD card, simply pull the stand

off of the camera. To replace, just snap it back on the

camera.

Honeywell Home app experience

When you launch the application, your Home screen is

displayed.

All of your devices (cameras, thermostats, water leak

detectors, etc.) are displayed. Select a camera from the

list to view live video from that camera.

Testing smoke/CO alarm detection

If your smoke or carbon monoxide alarm goes off and your camera is on, it

will send you an alert that a smoke or CO alarm has been detected.

To test this feature, press and hold the Test button on your smoke/CO

detector for at least 5 seconds or 3 cycles of the detector's alarm. A shorter

test might not trigger a sound event.

Table of Contents