Installation - Usb Interface - Opticon 25-ULGPMU01-01 User Manual

Manual No. 25-ULGPMU01-01
C.) Installation – USB Interface
Plug the scanner into the USB connector on your host computer. PC must be running Windows 98 or higher or iMac Rev A or
higher. The computer will sense the presence of the scanner and load any required software drivers automatically.
Reset All Defaults - USB Interface
Our scanners are shipped with factory default settings that represent the settings most commonly used by our customers. In most
applications, the scanner will work right out of the box without any need for additional programming. At any time you can return
the scanner to the factory default settings by scanning the "Reset all Defaults" programming bar code below.
Start
Program
ZZ
Menu
SU
USB
End
ZZ
Program Menu
Series LGP Handheld CCD Scanner
[[
TV
[[
Page 12