Table of Contents
Advertisement
U
'
DFM1000
SER
S MANUAL
1
INTRODUCTION
The DFM1000 bar code laser scanner has
been specifically developed for industrial use.
The rugged metal housing can easily be fixed
through an adapter on a DIN rail.
The high scan rate makes the scanner
extremely suitable for mounting on a conveyor
belt.
When the DFM1000 is connected to the host,
it will operate as a self supporting scanner. To
integrate the scanner to many industrial appli-
cations and other devices, it is provided with
several I/O lines which can be configured by
the user .
The general use and functioning of the scan-
ner will be described in this manual. For
instructions about applications please consult
the documentation of that software.
Read this manual carefully before using
the terminal, to maximise the efficiency of
this scanner.
Do not remove the scanner label.
includes information about the power supply
to the scanner and a serial number. Do not
remove it.
4
On the back housing
of every scanner you
will find a label. The
label is attached by
the manufacturer and
2
INSTALLATION
2.1 UNPACKING
When you remove the packing, please check
for any physical damage. We recommend that
you save all packing material, as it should be
used whenever you need to ship your terminal
(eg. for service). Damage due to improper
repacking is not covered by the warranty.
Make sure that all of the items shown below are
present. If there are any missing parts please
contact your supplier.
DFM1000:
Laser scanner:
including
OPTIONAL:
Configuration kit:
including
Double
Sided
DB25 male connector
+ 1,5 m cable
configuration disc with
configuration software
RS232 adapter
RS232 DB9 cable
12V power supply
Advertisement
Table of Contents
