Section 3 - Aileron Servo & Control Horn Installation - Sebart Sukhoi 29S 50E ARF Assembly Manual

step 2
Carefully glue, with some drops of thin CA, each of the four hinges in the aileron.
step 3
Locate the aileron and carefully glue, with some drops of thin CA, each of the four hinges into the
wing panel.
step 4
Work the aileron up and down some times to work the hinges and check for proper movement.
step 5
Repeat steps 1 through 4 for the remaining wing panel.
Section 3 – aileron servo & control horn installation
step 1
Locate the following items included in the hardware pack and the servo.
7