Sebart 50E ARF Assembly Manual

SebArt
The new Sebart 50E ARF was designed by Italy aerobatic pilot,
Sebastiano Silvestri and it is a replica of a new full-scale
aerobatic airplane.
This professional ARF kit is the result of Sebastiano's long
research in 3D unlimited performances. This combined with an
extremely lightweight structure, the all wood airframe, the very
big control surfaces with special airfoil and the lift generators
on landing gear give the Sebart 50E ARF an impressive thrust-
to-weight ratio and crisp control authority at any airspeed and
flight condition.
This new 50 class model will enter you into the next level of
performace!
The Sebart 50E ARF can do it all...unbelievable easy harriers,
torque rolls, blenders, waterfalls and almost anything else you
can dream up are waiting you!
Specifications:
Wingspan:.................154 cm (61 in)
Length:....................154 cm (61 in)
Wing Area:...........51 dm² (800 sq.in)
Sebart
ASSEMBLY MANUAL
.....the only aerobatic limit is your fantasy!
professional line
50E ARF
Recommended Set Up:
Weight:....2.400g (84 oz) RTF less motor battery
Radio:.....5-ch with 4 standard digital servo MG
Motor: Hacker A50-16S+ESC 70A BEC+apc 17x8E
2