Table of Contents
Advertisement
Quick Links
SebArt
professional line
Mini Avanti 1.4m
ARF
EDF or P20 micro-turbine
ASSEMBLY MANUAL
The all new Mini Avanti Jet 1.4m ARF was designed by Italy
aerobatic pilot Sebastiano Silvestri. This sport ARF jet-model
design is based on Hawk real aircraft design and modifided adding
the ultimate aerodynamically ideas of the modernst pattern models
and using the 15 years experience in flying jets of Seba.... the
result is surprising!
This innovative design combined with the lightweight structure,
the fiberglass fuselage and all wood airframe wings and stabs, give
the Mini Avanti Jet 1.4m ARF an impressive precision and
smoothness at any airspeed and flight condition. Thanks of his low
wingload and the powerfull 90mm 12 blades EDF or the P20
micro-turbine, it can be a fantastic aerobatic jet-trainer... let you
surprise from your new Mini Avanti Jet ARF !
.....the only aerobatic-fun limit is your fantasy!
Specifications:
Wing span: .................1360 mm
Length:..................... 1420 mm
Wing area:................. 38 sq. dm
Radio:..... 6+ ch. + 7 MG sub-micro servos
(3 servos for doors and steering are included with the kit and factory installed)
Advertisement
Table of Contents
Related Manuals for Sebart Mini Avanti 1.4m ARF
Summary of Contents for Sebart Mini Avanti 1.4m ARF
- Page 1 SebArt professional line Mini Avanti 1.4m EDF or P20 micro-turbine ASSEMBLY MANUAL The all new Mini Avanti Jet 1.4m ARF was designed by Italy aerobatic pilot Sebastiano Silvestri. This sport ARF jet-model design is based on Hawk real aircraft design and modifided adding the ultimate aerodynamically ideas of the modernst pattern models and using the 15 years experience in flying jets of Seba..
- Page 2 Weight with recommended power set up: EDF: Weight (less battery): 2.900g Weight RTF (with 5800-6S): 3.800g 90mm 12 blades aluminum EDF unit, 1750 Kw motor, 130A ESC with 8A bec 5V Micro-turbine P20: Weight (empty, less RX and Turbine battery): 3.050g Weight RTF (with 800-2S RX batt.
- Page 3 For a more realistic jet fying, more stable and easy in the wind, we recommend to install the SebArt 3 axis gyro system stabilizer for EDF installation or in case of use the P20 turbine is necessary the installation of the I-GIRO Power Box.
- Page 4 Flaps: We recommend to use flaps down for starts and landings to make them shorter and easier. Activate the FLAP function in your radio. For start use approx. 20° flaps down and mix 8% elevator down For landing use approx. 50° full flap down and mix 20% elevator down ...
- Page 5 Be sure that your motor battery pack is fully charged, as per the instructions included with your batteries and that your radio is fully charged as per its instructions. Finally... have nice flights! SEBART International S.r.l. Via L. Tabellione, 1 47891 Rovereta - Repubblica di San Marino (RSM) www.sebart.it...
Need help?
Do you have a question about the Mini Avanti 1.4m ARF and is the answer not in the manual?
Questions and answers