Toro VACU-POWER Service Manual page 38

Figure 38
5.
Position the safety shield components as shown
in Figure 39, and secure the safety shield and
end caps with the two flanged head capscrews.
Torque all end cap capscrews.
End Cap Capscrew Torque:
25
N-m
(225
in
Ibs)
Figure 39
6. Install the wheel and tire assembly onto the pivot
arm using a shoulder bolt and nylon locknut.
Don't forget the washer that goes between the
wheel and the pivot arm.
7.
Check for free operation of the pivot arm.
Vacu-Power wer
33
Rear Suspension