Status Lights Of Led - Barco PFWX-51B User Manual

4.Projector Parts and Functions
13. RGBHV
Optional multi purpose input which can be inserted in the free slots.
Input Signal
RGBHV
Component Video
14. VGA
Standard 15-pin VGA connection socket to connect to RGB, high-definition component input or PC.The projector will
automatically detect the resolution of the input signal.
15. 3D SYNC OUT(5V)
The projector can be connected to a 3D emitter to send an infrared signal to 3D glasses (not supplied).
Connect to a 3D IR emitter to allow for wireless synchronization with 3D glasses devices.

4.4 Status lights of LED

OFF/STAND BY
The LED indicator shows solid RED when the projector is off and at standby mode.
ON
The LED indicator is off when the projector is on.
ERROR
The LED indicator is blinking at a 0.25 second interval when there is error occurred in projector. Please contact authorized
service personnel for help.
During start-up
The LED indicator is blinking at a 2 seconds interval when the projector power on.
OFF/Standby
ON
Error
During Start-Up
26
Downloaded From projector-manual.com Barco Manuals
Input (Sub-D) port
G/Y B/Pb
G B
Y Pb
Status LED location
1 sec 1 sec
R/Pr H
R H
Pr -
1 sec 1 sec
V
V
-
1 sec
PFWX-51B/PFWU-51B 10/02/2014