Clean The Dust; Cleaning The Lens; Cleaning The Exterior Of The Projector - Barco PFWX-51B User Manual

10.Maintenance

10.2 Clean the dust

1. Remove most contamination with a vacuum cleaner.
2. Blow remaining dust away with compressed air in an other room or outside.

10.3 Cleaning the lens

Necessary tools
Toraysee cloth (delivered together with the lens kit). Order number: R379058.
TM
How to clean the lens?
1. Always wipe lenses with a CLEAN Toraysee
2. Wipe lenses in a one single direction.
Warning: Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.
3. Do not leave the cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.

10.4 Cleaning the exterior of the projector

How to clean the exterior of the projector?
1. Power off the projector and unplug the projector from the mains power net.
2. Clean the housing of the projector with a damp cloth. Stubborn stains may be removed with a cloth lightly dampened
with a mild detergent solution.
62
Downloaded From projector-manual.com Barco Manuals
To minimize the possibility of damage to optical coatings, or scratches to lens surfaces, we have developed
recommendations for cleaning. FIRST, we recommend you try to remove any material from the lens by
blowing it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
C
AUTION: Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the
cloth.
Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
Other lenses can also be cleaned safely with this Toraysee
cloth.
TM
cloth.
TM
PFWX-51B/PFWU-51B 10/02/2014