Barco PFWX-51B User Manual

Congratulations on purchasing
this product
1
(EU/US/CH)
user
manual
AAA (2x)
2
Loosen the captive screws
on each of the two side panels.
3
Please consult the
full User Manual
for detailed info on
Lens Assembly or
Lens Replacement.
This should only be
done by a qualified
Service Technician,
preferrably prior to
ceiling mounting.
4
5
110
130
Menu - OK
Menu - LEFT
Power
On/StandBy
Status Led
INPUT BRIGHTNESS
ASPECT RATIO LENS FOCUS
KEYSTONE LANGUAGE
i
SERVICE ADVANCED
- Remove the lens before transporting the projector.
- To save lamp lifetime, first switch the projector to standby mode
and wait two minutes, then switch off the main power.
- Ensure that the projector is operating with clean filters.
- Do not block the ventilation in -and outlets.
- Using the projector at a non recommended tilt angle will reduce the lifetime of the lamps
or create unexpected behaviour of the unit.
- Laser light can cause severe damage to the DMD. This damage is not covered by warranty.
For more information and Maintenance Guidelines,
check the Detailed User Manual on:
http://www.barco.com/en/products-solutions/projectors
220
260
6
7
8
IR Position
Front
OFF/STBY
ON
Error
During Start-up
9
CONTRAST COLOR
LENS ZOOM LENS SHIFT
i M
INFO MODE
10

Quick Setup Guide

Packaging Contents

Side Cover Removal
Lens Assembly
to gain access to the inputs panel.

Ceiling Mount*

M4x8 MAX.
(4x)
Please check the manual of your
supportsystem for compatability
*(Ceiling mount system is not included)
Input Cables
(See User Manual for detailed info on Inputs and PiP)

Remote Control

Feedback LED
Menu - UP
Menu - RIGHT
Menu - DOWN
Home/Menu
Battery Lid
(Slide down
to open)
Starting Projector
1 sec 1 sec
OSD Lite Menu
INPUT
BRIGHTNESS
CONTRAST
COLOR
ASPECT RATIO
LENS FOCUS
LENS ZOOM
LENS SHIFT
KEYSTONE
LANGUAGE
INFO
MODE
SERVICE
ADVANCED
Important Info
PFWX-51B
PFWU-51B
Direction to release
the side covers from the unit.
Rear Cover
Flip open the rear lid
Unit Weight: 12,6 kg
Quick Keys
(for Remote and keypad)
Quick Key 1
Push Menu-UP twice
for instant 'Picture Mute'
Quick Key 2
Push Menu-OK for
quick access to the
Focus/Zoom Menu
IR Position
1 sec 1 sec
Toggle between input sources
adjust lamp brightness level
adjust image contrast
adjust image colour
modify image aspect ratio
adjust lens focus
adjust lens zoom
adjust lens shift
adjust keystone
select language
information on lamp status
normal/eco/power
service information
see user manual
Rear
1 sec