Source; Projection - Barco PFWX-51B User Manual

Settings 1
Advanced 1 3D
Setting
Settings 1
Advanced 2

8.2 Source

Use this function to specify the source of image connected to the rear of the projector. For instance, if you have connected
your PC as the video input source, you can choose RGB D-15(RGB-HV/SOG) to be the input for image projection. Options of
input available on the projector include: DVI, HDMI, DisplayPort, VGA 1, VGA 2, BNC, Component Video, S-Video, Compositive
Video.

8.3 Projection

By default, the projector is configured for "frontal projection - desktop installation". If you choose to install your projector in
other setups, be sure to adjust the screen orientation to achieve the correct projection mode.
Front projection - ceiling mode
Press HOME  OSD Lite MENU  ADVANCED  Enter Password  Settings 1  Projection 
configured for "frontal projection - ceiling mode".
Correct Picture
canoe
PFWX-51B/PFWU-51B 10/02/2014
Downloaded From projector-manual.com Barco Manuals
3D Off, DLP-Link, IR
3D Sync Invert Off, On
Frame Sequential,
Top/Bottom,
Side-By-Side,
3D Format
Frame Packing (3D
FramePacking HDMI
source only)
None, Grid, White, Red,
Test Pattern
Green, Blue, Black
H Image Shift -50~50
V Image Shift -50~50

; the projector is now
c a n o e

8.Settings 1
49