Preferences - Onkyo TX-SR703/703E Instruction Manual

Advanced Setup—Continued

Preferences

This section explains items on the "Preference" menu.
7
PHONO
+ 10
-- /-- -
1
RECEIVER
RECEIVER
TAPE/AMP
TV
DIMMER
+
ENTER
CH
DISC
ALBUM
-
PREV
CH
DISPLAY
REC
1 Press the [RECEIVER] REMOTE
RECEIVER
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "7. Preference,"
and then press [ENTER].
ENTER
The Preference menu appears.
7.Preference
------------------------
ENTER
3
Use the Up and Down [
buttons to select a preference,
and then press [ENTER].
ENTER
ENTER
78
8 9
TV VOL
0
CLEAR
10 11 12
INPUT SELECTOR
MACRO
2 3 ZONE2
REMOTE MODE
DVD CD HDD
VCR CABLE SAT
CDR MD
SLEEP
ENTER VOL
SETUP
MUTING
PLAYLIST RANDOM
]/[
1.IntelliVolume
2.Volume Setup
3.OSD Setup
4.OSD Position
5.HDMI Setup
6.Lock Setup
]/[
4
Use the Up and Down [
buttons to select an option, and
use the Left and Right [
ENTER
buttons to change it.
The preferences are explained in the
next column.
5 When you've finished, press the
[SETUP] button.
Setup closes.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
IntelliVolume
With this preference, you can set the input level for each
input source. This is useful if some of your components
are louder or quieter than others.
Use the Up and Down [
input selector, and use the Left and Right [
tons to set the level.
If a component is too loud compared to your other com-
ponents, use the Left [
]
If it's too quiet, use the Right [
input level. The level can be set from –12 dB to +12 dB.
Volume Setup
■ Volume Display
With this preference, you can choose how the volume
level is displayed.
Absolute: Display range is MIN, 1 through 99, MAX.
Relative: Display range is –∞ dB, –81 dB, –80 dB
through +18 dB.
The absolute value 82 is equivalent to the relative value
0 dB.
■ Muting Level
]
This preference determines how much the output is
muted when the Muting function is used (see page 58).
It can be set to –∞ dB (default) or between –50 dB and
–10 dB in 10 dB steps.
■ Maximum Vol
With this preference, you can prevent the volume being
set too high by specifying a maximum volume level.
When the "Volume Display" preference is set to "Abso-
lute," the range is from 50 to 99. When it's set to "Rela-
tive," the range is –32 dB to +17 dB. To specify no
maximum volume, select "Off."
]/[ ]
]/[ ]
]/[ ] buttons to select an
]/[ ] but-
] button to reduce its input level.
] button to increase its