Onkyo TX-SR703/703E Instruction Manual page 72

Advanced Setup—Continued
Speaker Distance
These settings are set automatically by the Automatic
Speaker Setup function (see page 40).
With these settings, you can specify the distance from
each speaker to the listening position.
1
Press the [RECEIVER] REMOTE
RECEIVER
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "3. Speaker
Setup," and then press [ENTER].
ENTER
The Speaker Setup menu appears.
ENTER
3
Use the Up and Down [
buttons to select "Speaker Dis-
tance," and then press [ENTER].
ENTER
The Speaker Distance menu appears.
ENTER
Note:
Speakers that you set to No or None on
the Speaker Config menu (page 70)
cannot be selected.
72
]/[
]/[
3-3.Speaker Distance
------------------------
a.Unit :feet
b.Left :12ft
c.Center :12ft
d.Right :12ft
e.Surround R : 7ft
f.SurrBack R : 7ft
g.SurrBack L : 7ft
h.Surround L : 7ft
i.Subwoofer :12ft
4
Use the Up and Down [
buttons to select "a. Unit," and
then use the Left and Right
ENTER
[
ENTER
meters: Select if you want to enter
5
Use the Up and Down [
buttons to select each speaker
and then use the Left and Right
ENTER
]
[
distance.
Specify the distance from the speaker
to your listening position.
ENTER
6
Repeat step 5 for all speakers.
]
7 Press the [SETUP] button.
Setup closes.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
]/[
]/[ ] buttons to select:
feet: Select if you want to enter
distances in feet. Can be set
from 1 to 30 feet in 1-foot
steps.
distances in meters. Can be
set from 0.3 to 9 meters in
0.3-meter steps.
]/[
]/[ ] buttons to specify the
]
]