Using The Listening Modes; Selecting The Listening Modes - Onkyo TX-SR703/703E Instruction Manual

Onkyo instruction manual av receiver tx-sr803/803e, tx-sr703/703e, tx-sr8370
Table of Contents

Advertisement

Using the Listening Modes

Selecting the Listening Modes

For a description of each listening mode, see "About the
Listening Modes" on page 62.
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial, optical, or HDMI).
• Listening mode availability depends on the
format of the current input signal.
• While a pair of headphones is connected,
you can only select the Pure Audio, Mono,
Direct, or Stereo listening mode.
Selecting on the AV Receiver
STEREO
STANDBY/ON
STANDBY
ZONE 2
POWER
ON
OFF
PURE AUDIO
MULTI CH
DVD
VIDEO 1
VIDEO 2
PHONES
ZONE 2
OFF
TONE
STEREO
LISTENING MODE
ZONE 2 LEVEL
PURE AUDIO
LISTENING MODE
■ [PURE AUDIO] button
This button selects the Pure Audio listening mode.
When this mode is selected, the AV receiver's dis-
play is turned off and only the HDMI OUT outputs
video signals. Pressing this button again will select
the previous listening mode.
■ [STEREO] button
This button selects the Stereo listening mode.
■ LISTENING MODE [
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
60
MASTER VOLUME
VIDEO 3
VIDEO 4
PHONO
TAPE
TUNER
CD
DISPLAY
VIDEO 4 INPUT
TUNING
ENTER
SETUP MIC
DIMMER
MEMORY
MODE
SETUP
RETURN
PRESET
PRESET
CLEAR
VIDEO
L
AUDIO
R
TUNING
DIGITAL
S VIDEO
]/[
] buttons
Selecting with the Remote Controller
+
CH
DISC
ENTER
ALBUM
-
PREV
CH
DISPLAY
REC
PLAYLIST
SURR
LISTENING MODE
STEREO
STEREO
SURR
REPEAT
AUDIO
PURE A
PURE A
DIRECT
TEST TONE
CH SEL
DIRECT
OPEN/CLOSE
VIDEO OFF
RC-620M
■ [STEREO] button
This button selects the Stereo listening mode.
■ [SURR] button
This button selects the Dolby Digital and DTS listen-
ing modes.
■ LISTENING MODE [
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
■ [PURE A] button
This button selects the Pure Audio listening mode.
When this mode is selected, the AV receiver's dis-
play is turned off and only the HDMI OUT outputs
video signals.
■ [DIRECT] button
This button selects the Direct listening mode.
■ [THX] button
This button selects the THX listening modes.
■ [ALL ST] button
This button selects the All Channel Stereo listening
mode.
VOL
MUTING
RANDOM
,
SUBTITLE
PLAY MODE
ALL ST
THX
ALLST
LEVEL
LEVEL
THX
L NIGHT
Re-EQ
]/[
] buttons

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents