Table of Contents
Advertisement
71320
ENGLISH
CONTROlS AND fEATURES
Wireless Remote Control
This pressure washer is equipped with a wireless remote
control system for starting and stopping . The system
consists of (4) main components:
1 . Receiver Control Module (RCM)
2 . Wireless Remote
3 . Battery Switch
4 . Ignition Switch
The Remote Control functions are enabled when:
1 . The Ignition Switch is in the "ON" position, AND
2 . The Battery Switch is in the "ON" position .
The Remote Control functions are disabled if either of
the above conditions is not met .
To start the pressure washer by Remote Control, press
the "START" button on the Remote one time . The
engine will attempt to start (6) times . The RCM controls
the Auto Choke during each attempt to start . If the
pressure washer does not start, call Champion Customer
Care team for assistance at 1-877-338-0999 .
To stop the pressure washer by Remote Control, press
the "STOP" button on the Remote one time .
Remote Control Power Consumption
While the Ignition Switch is in the "ON: position, the
RCM is active and waiting for a remote signal . This
function requires electrical current from the battery .
If the Ignition Switch is left in the "ON" position for
extended periods (several weeks), the battery can be
completely drained .
Moving the Ignition Switch to the "OFF" position
disables the Remote functions, but the RCM still
consumes approximately 2 mA from the battery .
To prevent battery drain, press the Battery Switch to the
"OFF" position . This disconnects power to the RCM so
there is no current draw on the battery .
7
REV 71320-20120305
Advertisement
Table of Contents
