Replacing The Headlight Bulb - Toro 38624 Operator's Manual

Replacing the Headlight Bulb

Use a GE 892 16W halogen light bulb. Do not touch
the bulb with your hands or allow dirt or moisture to
come into contact with the bulb.
1. Remove the wire connector from the back of the
headlight (Figure 52).
2. Turn the base of the bulb counterclockwise until it
stops (Figure 53).
3. Remove the bulb straight out from the back of the
headlight (Figure 54).
4. Insert a new bulb into the back of the headlight
(Figure 55).
Figure 52
Figure 53
Figure 54
Figure 55
5. Turn the base of the bulb clockwise until it is snug
(Figure 56).
6. Insert the wire connector straight into the back of
the headlight until it is securely in place (Figure 57).
24
Figure 56
Figure 57