Replacing The Drive Belts; Replacing The Headlight Bulb - Toro Power Max Heavy Duty 928 OHXE Operator's Manual

Replacing the Drive Belts

If the auger/impeller drive belt or the traction drive belt
becomes worn, oil-soaked, or otherwise damaged, have an
Authorized Service Dealer replace the belt.

Replacing the Headlight Bulb

Use a GE 899 37W halogen light bulb. Do not touch the
bulb with your hands or allow dirt or moisture to come into
contact with the bulb.
1. Remove the wire connector from the back of the
headlight (Figure 60).
Figure 60
2. Turn the base of the bulb counterclockwise until it
stops (Figure 61).
Figure 61
3. Remove the bulb straight out from the back of the
headlight (Figure 62).
Figure 62
4. Insert a new bulb into the back of the headlight
63).
5. Turn the base of the bulb clockwise until it is snug
(Figure 64).
6. Insert the wire connector straight into the back of the
headlight until it is securely in place
(Figure
26
Figure 63
Figure 64
(Figure 65).
Figure 65