Operation; Freewheeling Or Using The Self-Propel Drive - Toro 38624 Operator's Manual

Figure 16
1. Choke
2. Ignition switch
3. Fuel shutoff valve
4. Throttle
Figure 17
1. Snow cleanout tool (attached to the handle)
5. Recoil starter
6. Oil drain plug
7. Primer

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.
Freewheeling or Using the
Self-propel Drive
You can operate the snowthrower with the self-propel
feature engaged or disengaged (freewheeling).
To freewheel, slide the wheels inward and insert the axle
pins through the outer axle holes, but not through the
wheel hubs (Figure 18).
To self-propel, slide the wheels outward and insert the
axle pins through the holes in the wheel hubs and the
inner axle holes (Figure 19).
12
Figure 18
Figure 19