Replacing The Headlight Bulb; Replacing The Drive Belts - Toro Power Max 828LXE Operator's Manual

Replacing the Headlight
Bulb
Use a GE 892 16W halogen light bulb. Do not
touch the bulb with your hands or allow dirt or
moisture to come into contact with the bulb.
1. Remove the
wire connector
from the back of
the headlight.
2. Turn the base
of the bulb
counterclockwise
until it stops.
3. Remove the
bulb straight out
from the back of
the headlight.
4. Insert a new
bulb into the back
of the headlight.
5. Turn the base
of the bulb
clockwise until it is
snug.
6. Insert the wire
connector straight
into the back of the
headlight until it is
securely in place.
21

Replacing the Drive Belts

If the auger/impeller drive belt or the traction drive
belt becomes worn, oil-soaked, or otherwise
damaged, go to www.Toro.com for additional service
information or have an Authorized Service Dealer
replace the belt.
m-7017
m-7012
m-7013
m-7014
m-7015
m-7017
3351-762 Rev A