AFG 2.0 AE User Manual page 6

ASS E MB LY ST EP 
WASHER (N)
BOLT (M)
PEDAL ARM
A) Open HARDWARE BAG FOR STEP 4.
B) Attach FOOTPAD to LINk ARM using 4 BOLTS (J) and 4 WASHERS (k).
C) Attach WHEEL cOVER to PEDAL ARM using 1 ScREW (L).
D) Repeat on other side.
E) Attach PEDAL ARM to PIVOT TUBE using 1 BOLT (M), 1 WASHER (N) and 1 WAVY WASHER (O).
F) Repeat on other side.
HARDWARE BAG FOR STEP  CONTENTS :
LOWER LINK ARM
10
2.0 AE_Rev.1.6.indd 10-11
FOOTPAD
LINK ARM
WASHER (K)
BOLT (J)
SCREW (L)
WHEEL COVER
WAVY WASHER (O)
PIVOT TUBE
LOWER HANDLEBAR
LOWER LINK ARM
SPACER RINGS
NUT (R) WASHER (Q) BOLT (P)
BOLT (J) WASHER (K) SCREW (L)
12 mm 15 mm 12 mm
Qty: 8 Qty: 8 Qty: 2
BOLT (M) WASHER (N) WAVY WASHER (O)
SPACER AND SPACER RINGS
20 mm Qty: 2 Qty: 2
SIDE VIEW
Qty: 2
ASSEMBLY STEP 
LINK ARM
WASHER (K)
BOLT (J)
WHEEL COVER
LOWER LINK ARM
A) Open HARDWARE BAG FOR STEP 5.
B) Slide SPAcER into LOWER LINk ARM.
C) Place SPAcER RINGS on both sides of the SPAcER. While holding SPAcER RINGS, slide LOWER LINk ARM
into bottom end of LOWER HANDLEBAR.
D) Insert 1 BOLT (P) into LOWER HANDLEBAR and secure using 1 WASHER (Q) and 1 NUT (R).
E) Repeat on other side.
HARDWARE BAG FOR STEP  CONTENTS :
LOWER
HANDLEBAR
SPACER
LOWER HANDLEBAR LOWER LINK ARM
SPACER RINGS
NUT (R) WASHER (Q) BOLT (P)
SPACER AND SPACER RINGS
BOLT (P)
WASHER (Q) NUT (R)
45 mm
Qty: 2 Qty: 2
Qty: 2
SPACER
SPACER RING
Qty: 2
Qty: 4
LOWER
HANDLEBAR
SPACER
11
8/27/07 3:30:04 PM