Vinten Vision 11 Maintenance Manual page 13

Contents
8 Pan bar mounting points
platform. A telescopic pan bar
available on the mount serrations. A second pan bar may be fitted.
9 The camera is attached to the head by means of a slide plate
adaptor. A clamp (6) is provided to hold the slide plate in position and a lock
removal from the head.
10 A ball base and clamp
the switch (14), is fitted at the rear of the head. Adaptors are available which permit installation on other
mounts.
(3) are located at the rear of the head, on either side of the camera mounting
(1) is supplied and is attached using a pan bar clamp, with angular adjustment
(8) for mounting on a 100 mm bowl is provided. A level bubble (9), illuminated by
First Previous
Page Page
(12) or by using the optional Quickfit
(16) prevents its inadvertent
Next Previous
Page View
13