General - Vinten Vision 11 Maintenance Manual

Contents

General

1 The following special tools and consumable materials will be required for servicing, disassembly, repair,
assembly and adjustment.
Special tools
NOTE: Adhesives and lubricants are not supplied by Vinten Broadcast Ltd and should be
obtained under local arrangements
Consumable materials
ITEM
Grease, Easyrun 50
Grease, Castrol LM
Loctite 222E
Loctite 406
Loctite 495
Silcoset 153
Vinten fluid No. 3
Section 3
Tools and Materials
ITEM
Pin press
Special thumb screw
PART No.
Z150-081
Z150-123
Z002-075
Z002-097
Z002-059
Z002-036
3051-30
First
Page
PART No.
3431-912TL Installing dowel pin to
connect actuator shaft and
adjustment slide
3441-907TL Assembling pan and tilt drag
units
USE
Lubrication
Lubrication
Screw locking
LED housings
Spring cap buffer
Pin retainer
Drag fluid
Previous Next Previous
Page Page View
PROCEDURE
18