Table of Contents
Advertisement
Periodic maintenance and adjustment
1
NO.
ITEM
2
11
Drive chain
3
4
12 * Steering bearings
5
13 * Chassis fasteners
Brake lever pivot
6
14
shaft
Brake pedal pivot
15
7
shaft
Clutch lever pivot
16
shaft
8
Shift pedal pivot
17
shaft
9
18
Sidestand
19 * Sidestand switch
10
20 * Front fork
Shock absorber
11
21 *
assembly
Rear suspension
relay arm and
12
22 *
connecting arm
pivoting points
CHECK OR MAINTENANCE JOB
• Check chain slack, alignment and
condition.
• Adjust and lubricate chain with a
special O-ring chain lubricant
thoroughly.
• Check bearing play and steering
for roughness.
• Lubricate with lithium-soap-based
grease.
• Make sure that all nuts, bolts and
screws are properly tightened.
• Lubricate with silicone grease.
• Lubricate with lithium-soap-based
grease.
• Lubricate with lithium-soap-based
grease.
• Lubricate with lithium-soap-based
grease.
• Check operation.
• Lubricate with lithium-soap-based
grease.
• Check operation.
• Check operation and for oil
leakage.
• Check operation and shock
absorber for oil leakage.
• Check operation.
ODOMETER READING
1000 km
10000 km
20000 km
(600 mi)
(6000 mi)
(12000 mi)
Every 800 km (500 mi) and after washing the motorcycle, riding in the rain or
riding in wet areas
Every 20000 km (12000 mi)
6-5
ANNUAL
30000 km
40000 km
CHECK
(18000 mi)
(24000 mi)
- Quick Links:
- Traction Control System
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
