Yamaha MTM850 Owner's Manual page 27

ments.
If the message "HI" flashes, stop the
vehicle, then stop the engine and let it
cool. (See page 6-39.)
TIP

When the coolant temperature is
below 40 C, "Lo" will be displayed.

The coolant temperature varies
with changes in the weather and
engine load.
Air temperature
1. Air temperature display
This display shows the air temperature
from –9 C to 99 C in 1 C increments.
The temperature displayed may vary
from the actual ambient temperature.
TIP

When the air temperature is below
–9 C, "Lo" will be displayed.

The accuracy of the temperature
reading may be affected when rid-
ing slowly (under 20 km/h [12
mi/h]) or when stopped at traffic
signals, railroad crossings, etc.
Clock
1
1. Clock
The clock displays time in 12-hour for-
mat. Even when the key is not in the
"ON" position, the clock can be viewed
for 10 seconds by pushing the bottom
set button.
3-12
Instrument and control functions
To set the clock
1. Turn the key to "ON".
2. Switch the display to the clock.
3. Push the bottom set button and top
set button together for two sec-
onds and the hour digits will start
flashing.
4. Push the top set button to set the
hours.
5. Push the bottom set button and the
minute digits will start flashing.
6. Push the top set button to set the
minutes.
7. Push the bottom set button to con-
firm settings and start the clock.
TIP
When setting the hours and minutes,
push the top set button briefly to in-
crease the increment value one by one,
1
or push and hold the button to increase
the increment value continuously.
1
2
3
4
5
6
7
8
9
10
11
12