D-Mode (Drive Mode) - Yamaha MTM850 Owner's Manual

Instrument and control functions
Brightness control
1
2
3
4
5
1. Brightness level display
6
The brightness level of the multi-func-
tion meter unit panel can be adjusted to
six brightness level settings.
7
To adjust the brightness
8
1. Turn the key to "OFF".
2. Push and hold the bottom set but-
9 ton.
3. Turn the key to "ON" and continue
pushing the bottom set button until
10
the display switches to the bright-
ness level display.
11
4. Push the top set button to set the
brightness level.
5. Push the bottom set button to con-
12
firm the selected brightness level
and exit the brightness level dis-
play.
1
3-13

D-mode (drive mode)

D-mode is an electronically controlled
engine performance system with three
mode selections ("STD", "A", and "B").
Push the drive mode switch "MODE" to
switch between modes. (See page
3-15 for an explanation of the drive
mode switch.)
1. Drive mode switch "MODE"
TIP
Before using D-mode, make sure you
understand its operation along with the
operation of the drive mode switch.
Mode "STD"
Mode "STD" is suitable for various rid-
ing conditions.
EAU47634
1