Yamaha MTM850 Owner's Manual page 22

Instrument and control functions
1
2
3
4
5
1. Top set button
2. Bottom set button
6
WARNING
Be sure to stop the vehicle before
7
making any setting changes to the
multi-function meter unit. Changing
8
settings while riding can distract the
operator and increase the risk of an
accident.
9
The multi-function
10
equipped with the following:

a speedometer

a tachometer
11

a fuel meter

an eco indicator
12

a transmission gear display

a drive mode display

a traction control system display

a multi-function display
TIP

Except when switching to the
brightness control mode or to dis-
play the clock, turn the key to "ON"
before using the bottom and top
set buttons.

For the UK: To switch the speed-
ometer and multi-function display
between kilometers and miles, set
the multi-function display to the
EWA12423
odometer mode or a tripmeter
mode, and then press the bottom
set button for three seconds.
Speedometer
meter unit is
1. Speedometer
The speedometer shows the vehicle's
traveling speed.
Tachometer
1
1. Tachometer
2. Tachometer red zone
The tachometer allows the rider to
monitor the engine speed and keep it
within the ideal power range.
NOTICE
Do not operate the engine in the ta-
chometer red zone.
Red zone: 11250 r/min and above
3-7
2
ECA10032