Yamaha MTM850 Owner's Manual page 44

Instrument and control functions
1
With the engine turned off:
1. Move the sidestand down.
2
2. Make sure that the start/engine stop switch is set to "
3. Turn the key on.
4. Shift the transmission into the neutral position.
3
5. Push the " " side of the start/engine stop switch.
Does the engine start?
4
5
With the engine still running:
6. Move the sidestand up.
6
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.
7
Does the engine stall?
8
After the engine has stalled:
9
10. Move the sidestand up.
11. Keep the clutch lever pulled.
10
12. Push the " " side of the start/engine stop switch.
Does the engine start?
11
12 The system is OK. The motorcycle can be ridden.
YES NO
YES NO
YES NO
WARNING
If a malfunction is noted, have a Yamaha
".
dealer check the system before riding.
The neutral switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The sidestand switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The clutch switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
3-29