Door Removal - Viking DSOE301SS Service Manual

Service Diagnostics and Procedures
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit before servicing.
Wires removed during disassembly must be replaced on proper terminals to insure correct earth ground and
polarization. After servicing, reconnect electrical power.

Door Removal

To remove oven door:
1. Open door completely.
2. Slide locking tabs, located on left and right
side of door hinge, down completely to
disengage hinge from receiver.
1
3. Close oven door to the broil stop position.
© 2010 Viking Preferred Service
WARNING
4. Lift door up and out.
5. Reverse procedure to reinstall.
Note: DSOE301SS model shown.
51