Table of Contents
Advertisement
Important: Maintain even pressure in all tires to ensure
uniform contact with the turf.
2
Adjusting the Step Height
No Parts Required
Procedure
The height of the steps can be adjusted for the operators
comfort.
1. Remove the 2 bolts and nuts securing the step brackets
to the traction unit frame (Figure 2)
1. Step
2. Raise or lower the step to the desired height and
re-secure the brackets to the frame with the 2 bolts
and nuts.
3. Repeat the procedure on the other step.
3
Adjusting the Control Arm
Position
No Parts Required
Procedure
The control arm position can be adjusted for the operators
comfort.
Figure 2
2. Step brackets
1. Loosen the 2 bolts securing the control arm to the
retaining bracket (Figure 3).
1. Control arm
2. Retaining brackets
2. Rotate the control arm to the desired position and
tighten the 2 bolts.
4
Remove the Shipping Blocks
and Pins
No Parts Required
Procedure
1. Remove and discard the shipping blocks from the
cutting decks.
2. Remove and discard the shipping pins from the cutting
deck suspension arms. The shipping pins stabilize the
cutting decks during shipping and must be removed
before operation.
14
Figure 3
3. Bolts (2)
Advertisement
Table of Contents
