Toro 30853 Operator's Manual page 21

Figure 16
1. Hydraulic filter restriction indicator
Power Point
The power point is a 12 volt power supply for electronic
devices (Figure 17).
Figure 17
1. Power point
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about your
machine such as the operating status, various diagnostics
and other information about the machine (Figure 18) There
is a splash screen and main information screen of the
InfoCenter. You can switch between the splash screen and
main information screen, at any time, by pressing any of
the InfoCenter buttons and then selecting the appropriate
directional arrow.
1
4
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can use it to
back out of any menu you are currently using.
•
Middle Button—use this button to scroll down menus.
•
Right Button—use this button to open a menu where a
right arrow indicates additional content.
Note: The purpose of each button may change depending
on what is required at the time. Each button will be labeled
with an icon displaying its current function.
InfoCenter Icon Description
SERVICE DUE
21
g020650
2
3
Figure 18
3. Middle button
4. Left button
Indicates when scheduled service
should be performed
Hour meter
Info icon
Fast
Slow
Fuel level